Ceiling Domes and Ceiling Light Diffuser Lens Manufacturing


Strong and beautiful structure is made by 2.3mm thick square hollow bar with our excellence welding workmanship.
Those size larger than 90 Inch width are constructed into 2 or more modules for easy to shipping. Many screw holes around the side of module for ease of assembly.

Patterns outline done by auto plotting machine, color is filled in manually by hand.
We are using Color pigment from UK.




Finished Translucent fiberglass panels are fitted with screws and finishing with aluminum flat bar.

View This Finished 10 ft diameter Dome


Laying down the line drawing

Ceiling Dome Art         Ceiling Dome Art
This border must setup before the color can be layed down.
Color is quite thick inside the panels.
A final clear pour will be added to seal it all inside and a texture added to that surface.

Ceiling Dome Art Church Ceiling Dome      Ceiling Dome Art Church Ceiling Dome
Finished Panels
Installation

Ceiling Dome  ceiling dome
Methods Of Installing your new ceiling dome.


Hanging by 1mm wire rope, outer wire rope for centering adjust.
Always use wire rope to support Dome.
Hang a ceiling light in the center or lighting from the dome outer.
Another method is to use "All Thread" Long Bolt Stock
So as you can see, Installation is a simple matter.


> View Completed Domes and Art


Flat Top Dome Frame
This frame design allows easy access for light replacement.


Email us for Artfiber Ceiling Art Domes Pricing
Please put an AF in the subject line.

Contact us at:
ARTFIBERGLASS
1675 DOGWOOD ST.
SWEET HOME, OREGON USA 97386
Phone: 1 541-359-4708
mail@artfiberglass.com


Cleaning & maintenance of Artfiberglass panels

Fiberglass panels have strong corrosion resistance.
It is best for corrosive environments such as near the sea and exposed to salt air.

To maintain good appearance and long life, Fiberglass panels, especially skylight panels,
should be hosed down or washed periodically.
Cleaning removes the accumulation of dust and dirt, which can combine with sunlight and wind to attack exposed surfaces, both chemically and abrasively.

Use non-corrosive cleaning compounds. Avoid the use of compounds containing ammonia or chlorine since they may cause panel discoloration.
Use only sponge, soft brush or soft cloth if need. Wash panels off with water or non-corrosive cleaning compounds.
This will normally remove any dirt that may be embedded in the panel's surface.


 

Dome Art Design

 Back to previous


Copyright © 2001-2008 Artfiberglass. All Rights Reserved.